VGCHANGE(8)

NAME
vgchange — Change volume group attributes

SYNOPSIS

vgchange option_args position_args
    [ option_args ]
    [ position_args ]

DESCRIPTION
vgchange changes VG attributes, changes LV activation in the kernel, and includes other utilities for VG maintenance.

USAGE
Change a general VG attribute. For options listed in parentheses, any one is required, after which the others are optional.

vgchange
    (
    )
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Start or stop monitoring LVs from dmeventd.

vgchange
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Start or stop processing LV conversions.

vgchange
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Activate or deactivate LVs.

vgchange
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ --persist String ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Reactivate LVs using the latest metadata.

vgchange
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Change the system ID of a VG.

vgchange VG|Tag|Select
    [ ]
    [ ]
    [ --persist String ]
    [ ]
    [ COMMON_OPTIONS ]

—

Set or clear flags to control persistent reservation behavior.

vgchange VG|Tag|Select
    [ ]
    [ --persist start ]
    [ COMMON_OPTIONS ]

—

Perform persistent reservation commands on devices.

vgchange VG|Tag|Select
    [ ]
    [ ]
    [ ]
    [ ]
    [ COMMON_OPTIONS ]

—

Set or clear lock_args flags to control lock manager behavior.

vgchange VG|Tag|Select
    [ ]
    [ COMMON_OPTIONS ]

—

Start the lockspace of a shared VG in lvmlockd.

vgchange
    [ ]
    [ --persist start ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Stop the lockspace of a shared VG in lvmlockd.

vgchange
    [ ]
    [ --persist stop ]
    [ COMMON_OPTIONS ]
    [ VG|Tag|Select ... ]

—

Change the lock type for a shared VG.

vgchange VG
    [ ]
    [ COMMON_OPTIONS ]

—

Common options for lvm:
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]
    [ ]

OPTIONS

Change the active state of LVs.
    An active LV can be used through a block device, allowing data on the LV to be accessed. y makes LVs active, or available. n makes LVs inactive, or unavailable. The block device for the LV is added or removed from the system using device-mapper in the kernel. A symbolic link /dev/VGName/LVName pointing to the device node is also added/removed. All software and scripts should access the device through the symbolic link and present this as the name of the device. The location and name of the underlying device node may depend on the distribution, configuration (e.g. udev), or release version. ay specifies autoactivation, which is used by system-generated activation commands. By default, LVs are autoactivated. An autoactivation property can be set on a VG or LV to disable autoactivation, see --setautoactivation y|n in vgchange, lvchange, vgcreate, and lvcreate. Display the property with vgs or lvs "-o autoactivation". The lvm.conf(5) auto_activation_volume_list includes names of VGs or LVs that should be autoactivated, and anything not listed is not autoactivated. When auto_activation_volume_list is undefined (the default), it has no effect. If auto_activation_volume_list is defined and empty, no LVs are autoactivated. Items included by auto_activation_volume_list will not be autoactivated if the autoactivation property has been disabled. See lvmlockd(8) for more information about activation options ey and sy for shared VGs.

Determines if LV activation is allowed when PVs are missing,
    e.g. because of a device failure. complete only allows LVs with no missing PVs to be activated, and is the most restrictive mode. degraded allows RAID LVs with missing PVs to be activated. (This does not include the "mirror" type, see "raid1" instead.) partial allows any LV with missing PVs to be activated, and should only be used for recovery or repair. For default, see lvm.conf(5) activation_mode. See lvmraid(7) for more information.

Adds a tag to a PV, VG or LV. This option can be repeated to add
    multiple tags at once. See lvm(8) for information about tags.

Determines the allocation policy when a command needs to allocate
    Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy which can be changed with vgchange/lvchange, or overridden on the command line. normal applies common sense rules such as not placing parallel stripes on the same PV. inherit applies the VG policy to an LV. contiguous requires new PEs to be placed adjacent to existing PEs. cling places new PEs on the same PV as existing PEs in the same stripe of the LV. If there are sufficient PEs for an allocation, but normal does not use them, anywhere will use them even if it reduces performance, e.g. by placing two stripes on the same PV. Optional positional PV args on the command line can also be used to limit which PVs the command will use for allocation. See lvm(8) for more information about allocation.

Specify if autoactivation is being used from an event.
    This allows the command to apply settings that are specific to event activation, such as device scanning optimizations using pvs_online files created by event-based pvscans.

Specifies if metadata should be backed up automatically after a change.
    Enabling this is strongly advised! See vgcfgbackup(8) for more information.

The command profile to use for command configuration.
    See lvm.conf(5) for more information about profiles.

Config settings for the command. These override lvm.conf(5) settings.
    The String arg uses the same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information about config.

Set debug level. Repeat from 1 to 6 times to increase the detail of
    messages sent to the log file and/or syslog (if configured).

Deletes a tag from a PV, VG or LV. This option can be repeated to delete
    multiple tags at once. See lvm(8) for information about tags.

Detaches a metadata profile from a VG or LV.
    See lvm.conf(5) for more information about profiles.

Restricts the devices that are visible and accessible to the command.
    Devices not listed will appear to be missing. This option can be repeated, or accepts a comma separated list of devices. This overrides the devices file.

A file listing devices that LVM should use.
    The file must exist in /etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

If set to no, the command will not attempt to use device-mapper.
    For testing and debugging.

Override various checks, confirmations and protections.
    Use with extreme caution.

Display help text.

Ignore the "activation skip" LV flag during activation
    to allow LVs with the flag set to be activated.

Allows a command to continue with read-only metadata
    operations after locking failures.

Do not interact with dmeventd unless --monitor is specified.
    Do not use this if dmeventd is already monitoring a device.

Record information in the systemd journal.
    This information is in addition to information enabled by the lvm.conf log/journal setting. command: record information about the command. output: record the default command output. debug: record full command debugging.

Used to pass options for special cases to lvmlockd.
    See lvmlockd(8) for more information.

Start the lockspace of a shared VG in lvmlockd.
    lvmlockd locks become available for the VG, allowing LVM to use the VG. See lvmlockd(8) for more information.

Stop the lockspace of a shared VG in lvmlockd.
    lvmlockd locks become unavailable for the VG, preventing LVM from using the VG. See lvmlockd(8) for more information.

Change the VG lock type to or from a shared lock type used with lvmlockd.
    See lvmlockd(8) for more information.

Sets the maximum number of LVs allowed in a VG.

Display long help text.

Change the VG system ID if the majority of PVs in the VG
    are present (one more than half).

Sets the maximum number of PVs that can belong to the VG.
    The value 0 removes any limitation. For large numbers of PVs, also see options --pvmetadatacopies, and --vgmetadatacopies for improving performance.

The metadata profile to use for command configuration.
    See lvm.conf(5) for more information about profiles.

Start (yes) or stop (no) monitoring an LV with dmeventd.
    dmeventd monitors kernel events for an LV, and performs automated maintenance for the LV in response to specific events. See dmeventd(8) for more information.

Do not use the hints file to locate devices for PVs. A command may read
    more devices to find PVs when hints are not used. The command will still perform standard hint file invalidation where appropriate.

Disable locking. Use with caution, concurrent commands may produce
    incorrect results.

Disables udev synchronization. The process will not wait for notification
    from udev. It will continue irrespective of any possible udev processing in the background. Only use this if udev is not running or has rules that ignore the devices LVM creates.

Commands will do their best to activate LVs with missing PV extents.
    Missing extents may be replaced with error or zero segments according to the missing_stripe_filler setting. Metadata may not be changed with this option.

Persistent Reservation operation.
    start: register local key and acquire reservation. stop: unregister local key, releasing reservation. remove: preempt and abort another key. clear: remove reservation and keys. check: check if started. autostart: start if the VG autostart flag is set. lvmlocal.conf pr_key or host_id must be configured to use PR. For local VGs, Write Exclusive (WE) is used, and for shared VGs Write Exclusive, all registrants (WEAR) is used. Use --setpersist to automate and/or require PR.

Sets the physical extent size of PVs in the VG.
    The value must be either a power of 2 of at least 1 sector (where the sector size is the largest sector size of the PVs currently used in the VG), or at least 128 KiB. Once this value has been set, it is difficult to change without recreating the VG, unless no extents need moving. Before increasing the physical extent size, you might need to use lvresize, pvresize and/or pvmove so that everything fits. For example, every contiguous range of extents used in a LV must start and end on an extent boundary.

When yes, start the background transformation of an LV.
    An incomplete transformation, e.g. pvmove or lvconvert interrupted by reboot or crash, can be restarted from the last checkpoint with --poll y. When no, background transformation of an LV will not occur, and the transformation will not complete. It may not be appropriate to immediately poll an LV after activation, in which case --poll n can be used to defer polling until a later --poll y command.

An alias for --commandprofile or --metadataprofile, depending
    on the command.

The number of metadata areas to set aside on a PV for storing VG metadata.
    When 2, one copy of the VG metadata is stored at the front of the PV and a second copy is stored at the end. When 1, one copy of the VG metadata is stored at the front of the PV. When 0, no copies of the VG metadata are stored on the given PV. This may be useful in VGs containing many PVs (this places limitations on the ability to use vgsplit later.)

Suppress output and log messages. Overrides --debug and --verbose.
    Repeat once to also suppress any prompts with answer 'no'.

Prevent the command from making changes, including activation and
    metadata updates. (See --permission r for read only LVs.)

If the LV is active, reload its metadata.
    In an environment where udev is used to manage the /dev content, usage of this option is highly recommended. This is because refresh also regenerates udev events for an LV based on which existing udev rules are applied to set the /dev content and permissions. Also, this operation may be useful if something has gone wrong, or if some form of manual LV sharing is being used.

A persistent reservation key to remove.

Overrides current output format for reports which is defined globally by
    the report/output_format setting in lvm.conf(5). basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. json_std produces report output in JSON format which is more compliant with JSON standard. See lvmreport(7) for more information.

Enables or disables the addition or removal of PVs to/from a VG
    (by vgextend/vgreduce).

Select objects for processing and reporting based on specified criteria.
    The criteria syntax is described by --select help and lvmreport(7). For reporting commands, one row is displayed for each object matching the criteria. See --options help for selectable object fields. Rows can be displayed with an additional "selected" field (-o selected) showing 1 if the row matches the selection and 0 otherwise. For non-reporting commands which process LVM entities, the selection is used to choose items to process.

Set the autoactivation property on a VG or LV.
    Display the property with vgs or lvs "-o autoactivation". When the autoactivation property is disabled, the VG or LV will not be activated by a command doing autoactivation (vgchange, lvchange, or pvscan using -aay.) If autoactivation is disabled on a VG, no LVs will be autoactivated in that VG, and the LV autoactivation property has no effect. If autoactivation is enabled on a VG, autoactivation can be disabled for individual LVs.

Add or remove lock_args settings for a shared VG.
    The lock_args determine lock manager behavior for the VG. These settings are only allowed for lock_type sanlock. persist: use persistent reservations for lock recovery. lvmlockd will preempt-abort the persistent reservation of a failed lock owner so that the lock can be acquired. notimeout: use locks that do not time out when the owner fails. In this case, a lock owned by a failed host can only be acquired using the persist feature. nopersist: do not use the persist feature. timeout: do not use the notimeout feature. The default behavior with no settings configured is: nopersist and timeout.

Set or clear flags to control persistent reservation behavior.
    y: set require and autostart flags. n: clear require and autostart flags. require: set flag, PR will be required to write or activate VG. norequire: clear require flag. autostart: set flag, PR will be automatically started. noautostart: clear autostart flag. ptpl: set flag, use persist through power loss on devices. noptpl: clear ptpl flag. When autostart is enabled, autoactivation and auto-lockstart commands will first start PR. lvmlocal.conf pr_key or host_id must be configured to use PR. For local VGs, enabling system_id is also recommended.

Indicates that vgchange/lvchange is being invoked
    from early system initialisation scripts (e.g. rc.sysinit or an initrd), before writable filesystems are available. As such, some functionality needs to be disabled and this option acts as a shortcut which selects an appropriate set of options. Currently, this is equivalent to using --ignorelockingfailure, --ignoremonitoring, --poll n, and setting env var LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES. vgchange/lvchange skip autoactivation, and defer to pvscan autoactivation.

Changes the system ID of the VG. Using this option requires caution
    because the VG may become foreign to the host running the command, leaving the host unable to access it. See lvmsystemid(7) for more information.

Run in test mode. Commands will not update metadata.
    This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't.

Generate new random UUID for specified VGs.

Set verbose level. Repeat from 1 to 4 times to increase the detail
    of messages sent to stdout and stderr.

Display version information.

Number of copies of the VG metadata that are kept.
    VG metadata is kept in VG metadata areas on PVs in the VG, i.e. reserved space at the start and/or end of the PVs. Keeping a copy of the VG metadata on every PV can reduce performance in VGs containing a large number of PVs. When this number is set to a non-zero value, LVM will automatically choose PVs on which to store metadata, using the metadataignore flags on PVs to achieve the specified number. The number can also be replaced with special string values: unmanaged causes LVM to not automatically manage the PV metadataignore flags. all causes LVM to first clear the metadataignore flags on all PVs, and then to become unmanaged.

Do not prompt for confirmation interactively but always assume the
    answer yes. Use with extreme caution. (For automatic no, see -qq.)

VARIABLES

VG  Volume Group name. See lvm(8) for valid names.

Tag Tag name. See lvm(8) for information about tag names and using tags in place of a VG, LV or PV.

Select
    Select indicates that a required positional parameter can be omitted if the --select option is used. No arg appears in this position.

String
    See the option description for information about the string content.

Size[UNIT]
    Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.

NOTES
If vgchange recognizes COW snapshot LVs that were dropped because they ran out of space, it displays a message informing the administrator that the snapshots should be removed.

EXAMPLES
Activate all LVs in all VGs on all existing devices.
vgchange -a y

Change the maximum number of LVs for an inactive VG.
vgchange -l 128 vg00

SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),

vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7), lvmvdo(7), lvmautoactivation(7)